Cost to Replace a Drain Cover: 2026 Price Guide by Drain Type

Fitting a new chrome shower drain cover with a screwdriver

TL;DR

Replacing a drain cover yourself costs about $15 to $50 for most home drains. A plumber charges $150 to $300 for the same shower job (Family Handyman, 2026).

Replacing the whole tub or shower drain, not just the cover, runs $500 to $1,020 with a national average of $700 (Angi, 2026).

Outdoor yard drain grates sell for roughly $14 for plastic and $45 to $52 for cast iron (Walmart.com listings, 2026).

Plumbers bill $45 to $200 per hour, with minimum service fees of $150 to $300 (Angi, 2026).

Street drain covers are the council’s job, not yours. Report a missing one instead of paying for it.

How Much Does It Cost to Replace a Drain Cover in 2026?

Most homeowners pay between $15 and $300 to replace a drain cover. The low end is a DIY swap of a shower or yard grate. The high end is a plumber visit. If the drain body underneath is damaged, the job becomes a full drain replacement at $500 to $1,020 (Angi, 2026).

Drain typeTypical costSource
Circular shower drain, part onlyAbout $15Angi, 2026
Linear shower drain, part only$200 or moreAngi, 2026
Shower drain swapped from the top, DIYUnder $50Family Handyman, 2026
Same swap done by a plumber$150 to $300Family Handyman, 2026
Full tub or shower drain replacement$500 to $1,020Angi, 2026
Outdoor plastic yard grateFrom about $14Walmart.com listings, 2026
Outdoor cast iron 12-inch grateAbout $45 to $52Walmart.com listings, 2026
Street drain cover (paid by council)About £200 averageBolton Council, 2019

What Is a Drain Cover and Which Type Do You Have?

A drain cover is the removable plate or grate that sits over a drain opening. It lets water through and blocks hair, leaves and debris. Plumbers also call the indoor version a strainer, and outdoor versions are often called grates (Angi, 2026).

Four types cover most replacement jobs:

  • Shower and tub drain covers sit flush with the floor of the shower or tub and screw in or snap in.
  • Floor and sink drain covers sit in basements, laundry rooms and garages.
  • Outdoor yard grates sit on catch basins that collect rain from downspouts and patios.
  • Street drain covers are cast iron or ductile iron plates in roads and pavements, owned by the local authority.

Cost to Replace a Shower or Tub Drain Cover

A shower drain cover costs about $15 for a circular style and $200 or more for a linear style, parts only (Angi, 2026). Doing the swap yourself costs under $50 including a tube of silicone. A plumber charges $150 to $300 for the same job (Family Handyman, 2026).

Many shower drain covers lift out or unscrew with a screwdriver. If the drain body is cracked or leaking, a new cover will not fix it. A full replacement of a tub or shower drain averages $700 (Angi, 2026), though HomeGuide puts the range lower, at $200 to $700 (HomeGuide, 2026).

Tile showers cost more. A drain set into tile often needs the surrounding tile cut out and re-sealed, which adds labor hours.

Cost to Replace an Outdoor Drain Grate

An outdoor drain grate costs $14 to $127 depending on material, based on current retail listings. Plastic grates start around $14, a 12-inch cast iron grate runs about $45 to $52, and heavier decorative or round grates reach $85 or more (Walmart.com listings, 2026). For context on the weight of different grates, see how much a drain cover weighs.

Most yard grates drop onto the catch basin or pop out with a flat blade, so no plumber is needed. Measure the opening first. Common sizes are 6, 9 and 12 inches, and a grate that is a half inch too small can fall into the basin.

Choose cast iron or ductile iron where vehicles or foot traffic cross the drain. Plastic grates suit lawns and planting beds.

Who Pays to Replace a Missing Street Drain Cover?

The local council or city public works department pays to replace a missing street drain cover, not the homeowner. Bolton Council in England reports an average replacement cost of £200 per cover, and more when a cover must be made to measure (Bolton Council, 2019).

If you spot a missing or broken cover on a road or pavement, report it to your council or city works department right away. An open drain is a safety hazard for cyclists, drivers and pedestrians. For the rules around covering drains, read whether it is illegal to cover a drain cover.

A cover on your own driveway or private property is usually your responsibility. Check your property records or ask the utility if you are unsure who owns it.

What Changes the Price of a Drain Cover Replacement?

Five factors change the final price of a drain cover replacement: cover style, labor rate, access to the drain, hidden damage and your region. Labor drives most of the difference because plumbers bill $45 to $200 per hour (Angi, 2026).

  • Cover style: a standard circular cover costs far less than a linear or custom design, which can exceed $200 for the part alone.
  • Labor and minimum fees: plumbers set minimum service fees of $150 to $300, so a five-minute swap can cost the same as a one-hour job (Angi, 2026).
  • Access: a drain behind tile, in a tight cabinet or under a finished floor takes longer to reach.
  • Hidden damage: corroded pipes or a failed drain body turn a cover swap into a repair.
  • Region: rates run higher in large metro areas and during peak seasons.

Should You Replace a Drain Cover Yourself or Hire a Plumber?

Replace the cover yourself if the drain body is intact and the cover lifts out or unscrews. Hire a plumber if the drain leaks, the cover is stuck, or the drain sits in tile. DIY costs under $50, while a plumber costs $150 to $300 (Family Handyman, 2026).

Follow these steps for a basic DIY swap:

  • Measure the old cover’s diameter and note whether it screws in, snaps in or presses in.
  • Buy a matching cover in the same material, finish and size.
  • Remove the old cover with a screwdriver or flat blade and clean the opening.
  • Fit the new cover and run water to check that it drains and sits flat.

Call a plumber if water pools around the drain, you see rust in the pipe, or a leak appears in the ceiling below.

Frequently Asked Questions About Drain Cover Replacement Costs

How much does it cost to replace a drain cover?

A DIY drain cover replacement costs $15 to $50 for most indoor and yard drains. A plumber adds labor, bringing a shower job to $150 to $300 (Family Handyman, 2026). A full drain replacement costs $500 to $1,020 (Angi, 2026).

How much does a plumber charge to replace a shower drain cover?

A plumber charges $150 to $300 to replace a shower drain cover (Family Handyman, 2026). Hourly rates run $45 to $200, and many plumbers apply a $150 to $300 minimum service fee (Angi, 2026).

Can I replace a drain cover myself?

Yes, in most cases. Indoor covers screw in or snap in, and outdoor grates lift out. You need a screwdriver or flat blade and a replacement of the same size and material. Call a plumber if the drain body is cracked or leaking.

What is the difference between a drain cover and a drain strainer?

They are the same part. A strainer is the plumber’s term for the indoor drain cover that catches hair and debris (Angi, 2026). Outdoor versions are usually called grates.

Who pays to replace a drain cover in the street?

The local council or city public works department pays. Bolton Council reports an average cost of £200 per cover (Bolton Council, 2019). Report a missing cover to the authority instead of replacing it yourself.

Why does a drain cover replacement sometimes cost more than expected?

The price rises when the drain body underneath is damaged, when the drain sits in tile, or when the plumber applies a minimum service fee. Unexpected corrosion in nearby pipes also expands the job.

Takeaways: What to Budget for a Drain Cover Replacement

  • Budget $15 to $50 for a DIY indoor or yard drain cover.
  • Budget $150 to $300 if a plumber replaces a shower drain cover.
  • Budget $500 to $1,020 if the whole drain needs replacing.
  • Report missing street drain covers to your council. Do not pay for them.
  • Measure your old cover before you buy, and match size, material and fastening.

References

About Our Content Creators

Jason Miller, lead writer at CoverCent

Jason Miller is the lead writer at CoverCent, covering protective covers, device accessories, product comparisons, and buying guides. His goal is to provide accurate, easy-to-understand information that helps readers choose products with confidence.

We may earn a commission if you click on the links within this article. Learn more.

One response to “Cost to Replace a Drain Cover: 2026 Price Guide by Drain Type”

  1. […] missing street grates to your city immediately. Tacoma, for one, estimates about $160 to replace a single grate (KOMO News, […]

Leave a Reply

Your email address will not be published. Required fields are marked *

More…!